This page may be used to send arbitrary commands to your P3. If your P3 is connected to a K3, and the command is other than a P3-specific command, the P3 relays the command the K3.
Type a command into the input area, and observe the P3 or K3 response in the output window. Commands are shown in green, responses are shown in black. Enter commands one at a time, a single character command followed by the Enter key.
Some command responses may contain unprintable characters. The command tester converts unprintable characters (those outside the range from \x20 to \x7E) into a hexadecimal representation.
Buttons on the Command Tester page are enabled only when the P3 Utility has established communications with your P3.
Above the output window are several rows of Macro buttons. These buttons may be configured by selecting the Edit Macros button. Once configured, click the macro button to enter the associated command.